Click Fraud
May
17
2012
Management functions in EPON / GEPON / GPON

Performance Management

Performance management is used in telecommunication system for monitoring and controlling key parameters that are allowing to deliver services of specific QoS to final customers. In FTTP network the functions monitored are:

  • loop-back function
  • fault supervision
  • ONU (ONT) failture
  • power switch off

Physical level errors that are monitored:

  • bit-rate error
  • optical power levels (monitored for OLT and ONT (ONU)

When any of these errors occur the management system is informed and alarm is generated.

 

Configuration Management

Configuration management is used for monitoring configuration of the network devices and network setup information. Functions that might be used:

  • setting optical power levels automatically
  • assigning bandwidth requested by a user
  • distributing software upgrades to agents
  • reconfiguring equipment to isolate faults

All the information is stored in one database which can be accessed anytime to help solving errors and other problems.

 

Accounting Management

Accounting management is used to measure parameters of users, so they can be regulated and billed for services properly. In addition all the statistics on the network use is collected and network usage quotas are allocated. From this information, the service provider may generate bills or tariffs for the service.

 

AD-net’s OLT’s have really practical and user friendly EMS managment.

 

nms_web

 

You can not just by clicking on icons easily set such parameters as VLAN’s, enable and disable ONU’s, and more, but also see monitoring information, for example distance in meters till each ONU.

 

If you are interested to learn more about AD-net OLT and it’s management features, you can go to this page.

Testimonials

Lomoveishiy – Finland

I needed those to connect my PC on the third floor to have internet access in that room, and ISP installed their modem on the first floor only. After dropping fiber patch cables, plugged in all cables into these media converters at both sides, and link came up instantly. Was much easier than I thought!

Raymond – USA

Great experience – units worked straight out of the box – just needed plug in cables and we were done. I also like the possibility to enable jumbo frames, while we do not have a need for this feature at the current moment it’s great to have this option.