Special Type SFP modules (3 Products)

Less common & more special datarate and interface modules listed in this category.

155M ~ 2.67Gbps SFP Optical Transceiver, 2 km – 20 km Reach

The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 2.67Gbps and 2km - 20 km transmission distance with SMF or 300 m by MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible…

1000 Base-T SFP module, 3.3V/5V 100m UTP5 Cat 5

1000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802, 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data-rate up to 100 meters reach over unshielded twisted-pair category 5-cable AD-net Technology SFP transceiver is a plug-in module and it is hot-swappable. It allows for seamless integration of fiber…

2.125 Gbps SFP Optical Transceiver, 10km Reach

The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 2.125Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and…

FTTx access+

Fiber Modules+

Media Converters+

Fiber Optical Multiplexers+

Video Audio Transmission Equipment+

Interface Converters+

Passive Optical Equipment+

SDH/MSPP Systems+

Switches+

Industrial Communication Products+

I have no doubt about buying ad-net product as long as I get positive response to clarifications I raised about my design and the product I intend making use among AD-NET series. Reliability of installed units and extremely low failure rate, in fact I have never experienced a failed units among the ones installed two years ago and even the ones installed 8-10months have been performing as expected. Like for example for the E1 converters it’s the reliability, but the product can move further if it can be designed to be IP based for management purposes. By experience I know AD-NET product is as good as buy, install and sleep as long as it fits the design for which its procured. I am in the business of spreading the good news of AD-NET reliability and effectiveness where others fail or might fail.
Raphael – Nigeria
Install and sleep as it fits design

Before I ordered products my most concern was quality of the product, not sure whether it will be able to work in our current network. But as a result quality product as opposed to what we have expected and the device is up to standard. What I like most is video transmission over single-strand fibre, cost saving solution. I would like to mention also prompt reply from sales staff. Overall, I had a great experience dealing with AD-net. They are very prompt in reply and the delivery schedule of the equipment is fast.
Lawrence – Singapore
Quality was most concern

I had no concern, was buying and testing, so equipment is ok. So equipment and logistic is ok, we keep ordering and making business.
Thomas – Germany
Equipment and logistics is OK

We are a Calling Card (VoIP) Service Provider. We serve corporate customers, some customers uses FO-link to connect the gateway in their site to our server site. In some cases we need to have Ethernet connection between 2 locations, with the distance of 2 location more then 100 m. So, we were considering to use your product to solve it. This device only need twisted pair cable, quite easy to find it, and the features is fulfill our need. Basically we would recommend it to others, but we need more experiences to use this device.
Andy – Indonesia
So far all is working well

We are searching product top extend existing analog video network. Adding new cables for IP camera is very expensive and we would like to find new solution to reuse existing cables. In the future we will use IP over coax but right now we have to work with both (analog & IP camera). Your product correspond to our needs. Just a question – when POE will be available over the existing RJ45 interface? Easy to install, cost effective, as a result w are trying to find French company interesting by this product to install-it on our network.
Fabrice – France
Your product correspond to our needs

Our main concern before we placed order was if it will work, and if the power supply will be able to cope with unstable generator power. Also high temperature and humidity which is a problem in Liberia. I find that the product does what is says, and I am very happy thus far, we had instances where power supplies on the LAN extender did blow unfortunately, we use the LAN extenders to feed our remoter sites of 3 to 5 machines, and it seems to work fine as a “Link”, not just a single machine device. It is plug and play, no complex configurations is needed, thus making it a reliable fast temporary link when we have fibre breakages or fibre module failures. Robust and like I said, very simple and easy to implement. Yes I would recommend it to others, especially for remote offices where there is existing telephone cable infrastructure, also a cheaper solution to Fibre links for less than 5 machines, so in the long run a big saving not having to have fibre equipment, cables and splicing.
George – Liberia
Product does what it says

Our main concern before ordering the product was unknown vendor, unsure about quality of product and level of support and service. However, so far it delivers as promised. In general AN-STM-1/SM is basic product that solves a simple problem, good price/performance
Rikard – Sweden
Product solves our problem

We generally shy away from buying products from Asian market due to inferior quality, finish, reliability, technical support, poorly prepared manuals, problems in interacting with engineers who have poor English knowledge etc. We also know that most of the Western (Europe and US) products are manufactured in the Asian market and rebranded. However western companies ensure all the above listed concerns are addressed before selling to the market. However I must say that AD-NET products are reasonably acceptable. The products are of acceptable quality, finish and reliability. We also would like to mention, that your product technical support is appreciable.
Raghavan – Sultanate of Oman
The products are of acceptable quality, finish and reliability

Our main concern, before buying the product was will it solve the problem of sending our TV signal from our studio to the various remote sites where amplifiers are located. As a result, we found it is effective to solve our situation It gives us stable and good picture and sound, and we will recommend product to others
Nii Ayite – Ghana
It gives stable picture and sound

Our main concern, before order the products, it was the fact that we are on the opposite side of the globe. In case of mail function of products and long shipment time. However, that it isn’t a problem due to no mail functions so far and quick shipment when buying. For the video over fiber transmitter the best it is the simplicity of the product, easy to install, only one fiber to send 16 bidirectional video and the price. I would like also mention good response , easy to get information and a impressive amount of products, so we would recommend products to others.
Hans – Sweden
Opposite side of the globe?

Our main concern before ordering products was the stability and the efficiency especially with the high temperature. So far, it is very good, very stable. Easy to configure – it is straightforward and very light. We 100 % recommend it to others.
Abdallah – Gambia
Stability and the efficiency

Our main concern before ordering products was the longevity and quality. product works good. We will consider more of your products in my projects at the moment I don’t find anything to add your service and support were good
Ilan – Israel
Longetivity and Quality

Before place the orders, our main concern was if those really are reliable enough products for our customers. As a result we found, that there is no customer complaint. In my memory, most preferable feature for the products are it’s management system Another special benefits about those products are for the media converters being able to use as standalone or chassis type same time We will definitely recommend AD-net products to other.
Somkid – Thailand
Reliable Products For Our Customers

Great experience – units worked straight out of the box – just needed plug in cables and we were done. I also like the possibility to enable jumbo frames, while we do not have a need for this feature at the current moment it’s great to have this option.
Raymond – USA

I needed those to connect my PC on the third floor to have internet access in that room, and ISP installed their modem on the first floor only. After dropping fiber patch cables, plugged in all cables into these media converters at both sides, and link came up instantly. Was much easier than I thought!
Lomoveishiy – Finland

Recent Blog Post

Dec

21

2020

Why you can not use APC connectors with UPC type equipment?
When picking fiber, you are [...]

Published By Ilya
Dec

17

2018

LECs, POPs and IXCs
In 1984, the Bell System in the USA was broken up in order t [...]

Published By admin
Dec

10

2018

Hierarchy of PSTN Switching Center
POTS and loops have already been discussed in great detail, [...]

Published By admin
Sep

14

2018

Attendant, Automated Attendant or IVR?
Now, if you are system integrator, and you are setting up cl [...]

Published By admin

Read All