TDM over IP equipment series (19 Products)
When you have IP based access network and need arrange TDM E1 G.703 based traffic leased line over it – look for a solution at this category. These units can send n x E1 over Ethernet with no loss & they are easy to set-up!
1 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer
The AN-TDM-IP-1E1-C is mainly used to transmit E1 signal over IP network. It has 2 interfaces for 1E1 (120ohm RJ45 and 75ohm BNC), 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-1E1-C can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly,…
2 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer
The AN-TDM-IP-2E1-C is mainly used to transmit E1 signal over IP network. It has 1 interface for 2E1, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-2E1-C can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base…
4 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer
The AN-TDM-IP-4E1-C is mainly used to transmit E1 signal over IP network. It has 2 interface for 4E1, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-4E1-C can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base…
16 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer
AN-TDM-IP-16E1-C is mainly used to transmit E1 signal over IP network. It has 16*E1 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-16E1-C can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base station, SS7 signaling…
8 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer
AN-TDM-IP-8E1-C is mainly used to transmit E1 signal over IP network. It has 8*E1 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-8E1-C can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base station, SS7 signaling…
4 & 8 POTS Telephone Channels over LAN Ethernet IP Mini Type Converter
The converter encapsulates the voice data in the IP packet, supports the UDP packet mode, realizes the 1-8 voice service to the 100M Ethernet conversion, in the same network segment or through the router to achieve different network segment communication.
16 E1 modular type Framed/Unframed, FXS/FXO/EM2-4/V35/V.24/RS232/422/385 TDM over IP multiplexer
The AN-TDM-IP-MOD device is mainly used to provide 4 service card slots on the IP network. It can be inserted into the E1 module (4 E1 interfaces), voice module (4/8/16 FOX/FXS interface), V.35 module (2 channels). V.35 interface), serial interface module (4-ch RS232/422/485 interface); maximum capacity can be filled in 4 slots. Enables operators and enterprises to seamlessly and reliably…
V35 over IP Ethernet converter | V.35 to Ethernet | V.35 Serial port over IP extender
AN-TDM-IP-V35 is mainly used to transmit V.35 interface over IP network. It has V.35 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-V35 can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the quantity. assures connecting to physical V.35 interface of any device seamlessly, It can be used in the communication system based…
64 voice FXS/FXO POTS over IP converter | Multiplexer – Telephone over Ethernet IP Converter System
The converter encapsulates voice data in IP data packets and supports UDP encapsulation to realize the conversion of 1-64 voice services to two 100M Ethernet networks. It can communicate on the same network segment or different network segments via routers.
16 voice FXS/FXO POTS over IP converter | Multiplexer – Telephone over Ethernet IP Converter System
The converter encapsulates voice data in IP data packets and supports UDP encapsulation to realize the conversion of 1-16 voice services to two 100M Ethernet networks. It can communicate on the same network segment or different network segments via routers.
30 voice FXS/FXO POTS over IP converter | Multiplexer – Telephone over Ethernet IP Converter System
The converter encapsulates voice data in IP data packets and supports UDP encapsulation to realize the conversion of 1-30 voice services to two 100M Ethernet networks. It can communicate on the same network segment or different network segments via routers.
V.24 over IP network converter | V.24 to IP multiplexer
AN-TDM-IP-V24 is mainly used to transmit V.24 interface over IP network. It has V.24 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-V24 can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the quantity. assures connecting to physical V.24 interface of any device seamlessly, It can be used in the communication system based…
STM-1 over IP (Ethernet) – SDH over IP Multiplexer
STM1 over IP converter is a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports. State-of-the-art design provides…
16 x E1 over IP | E1 over Ethernet Multiplexer – Converter
As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-16E1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 8~16 E1s and 5 GE electrical ports and 1 GE optical port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.…
8 x E1 over IP
As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-8E1 adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing IP network. AN-TDM-IP-8E1 is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of eight E1 and two local…
4 x E1/T1 over IP
As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-4E1 adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing IP network. AN-TDM-IP-4E1 is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of two E1 and two local…
2 x E1 over Ethernet – IP
2 x E1 over Ethernet mux is a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-2E1 adopts the innovative TDM over IP technology, it transports the legacy E1 data over the existing IP network. AN-TDM-IP-2E1 is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation…
2 x E1 G.703 TDM over IP/Ethernet converter / multiplexer – mini type casing, supporting Point to Multipoint feature
AN-TDM-IP-2E1/A is used to setup 2 transparent E1's channel over LAN or IP networks The AN-TDM-IP-2E1/A has many optional parameters, which can be modified by the user to suite different application requirements. Please read this manual carefully before installing the product. It is well known that the E1 signal comes from PCM technology which is TDM in nature. It transmits…
1 x E1 G.703 TDM over IP / Ethernet converter / multiplexer
AN-TDM-IP-1E1 is used to setup 1 transparent E1 channel over LAN or E1 to IP networks. The AN-TDM-IP-1E1 has many optional parameters, which can be modified by the user to suite different application requirements. Please read this manual carefully before installing the product. It is well known that the E1 signal comes from PCM technology which is TDM in nature.…