E1 to V35+ Ethernet Protocol Converter
AN-FE1-V35-ETH uses E1 slot multiplexing technology to choose random slot from standard E1 channel for different interface, realizes data conversion from E1 interface to V35 and ETH interface and compose V35 channel of n x 64K (n=1-32).
- realizes long-distance monitoring of this end equipment to the far-end equipment (two-row indicating lamp, upper row indicating local status, lower row indicating far-end status);
- based on self-copyright IC;
- overall rate of V.35 and Ethernet is 2048K, Ethernet rate will be allocated automatically after V.35 rate is set;
- realizes automatic rate following of remote-end equipment ordered by local-end equipment; Ethernet port
- provides 4 clock types: E1 master clock, E1 line clock, V.35 master clock, V.35 external clock;
- provides 3 kinds of loop-return function, namely E1 self-looping at local end, V.35/Ethernet self-looping at local end, and V.35/Ethernet being ordered to self-loop at remote end;
- has the function (PATT) of pseudo-random code testing, convenient for opening of the circuit, and can be used as a 2M error code instrument;
- supports 75Ω unbalanced and 120Ω balanced impedance at the same time;
- V.35 supports hot plugging and connection with DTE and DCE equipment;
- Ethernet interface 10/100M, half/full duplex self adaptable, supporting VLAN and AUTO-MDIX (crossed line and straightly connected line self-adaptable);
- has self-reset function of Ethernet monitoring, equipment will not be stacked;
E1 interface:
Interface standard: Conforms to G.703 standard
Code: HDB3 code
Rate:N*64K(N=1~32)
Interface impedance: 75Ω (non- balanced), 120Ω (balanced)
Connecter: BNC (75 Ω), RJ45 (120 Ω)
Vibration characteristic: Satisfies G.742 and G.823 standard
Clock type: internal-clock, route clock
10/100BaseT port:
Interface rate: 10/100Mbps
Duplex: half/full duplex self-adaptable
Interface characteristic: supports IEEE802.3, IEEE802.1Q (VLAN)
MAC address table: can learn 4096 MAC addresses
Ethernet overall slow storage (buffer): 64MBits SDRAM
Physical interface: RJ45
V.35 interface:
Interface speed: Nx64K
Connector:M34 female
Interface characteristic：satisfies ITU-T V.35standard
| AN-FE1-V.35-ETH/AC220V | E1/V.35+Ethernet converter, 75Ω, 120 Ω, 220V |
|
| AN-FE1-V.35-ETH/DC48 | E1/V.35+Ethernet converter, 75 Ω, 120 Ω, DC-48V |
Description
AN-FE1-V35-ETH uses E1 slot multiplexing technology to choose random slot from standard E1 channel for different interface, realizes data conversion from E1 interface to V35 and ETH interface and compose V35 channel of n x 64K (n=1-32).
It is suitable for the case that part slot of E1 channel can be used. The interface mode of V35 data is DCE, which can be connected with DTE of DCE equipment; Ethernet interface 10/100M, half/full duplex self-adaptable, and supports VLAN protocol;
Additional information
| E1 ports | 1 |
|---|---|
| V.35 ports | 1 |